A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

Uniform stability of semilinear wave equations with arbitrary local memory effects versus frictional dampings

This paper is concerned with the mixed initial–boundary value problem for semilinear wave equations with complementary frictional dampings and memory effects. We successfully establish uniform exponential and polynomial decay rates for the solutions to this initial–boundary value problem under much weak conditions concerning memory effects. More specifically, we obtain the exponential and polynomial decay rates after removing the fundamental condition that the memory-effect region includes a part of the system boundary, while the condition is a necessity in the previous literature; moreover, for the polynomial decay rates we only assume minimal conditions on the memory kernel function g, without the usual assumption of $g^{\prime }$ controlled by g.     

Analyticity of resonances and eigenvalues and spectral properties of the massless Spin–Boson model

We extend the method of Pizzo multiscale analysis for resonances introduced in [5] in order to infer analytic properties of resonances and eigenvalues (and their eigenprojections) as well as estimates for the localization of the spectrum of dilated Hamiltonians and norm-bounds for the corresponding resolvent operators, in neighborhoods of resonances and eigenvalues. We apply our method to the massless Spin–Boson model assuming a slight infrared regularization. We prove that the resonance and the ground-state eigenvalue (and their eigenprojections) are analytic with respect to the dilation parameter and the coupling constant. Moreover, we prove that the spectrum of the dilated Spin–Boson Hamiltonian in the neighborhood of the resonance and the ground-state eigenvalue is localized in two cones in the complex plane with vertices at the location of the resonance and the ground-state eigenvalue, respectively. Additionally, we provide norm-estimates for the resolvent of the dilated Spin–Boson Hamiltonian near the resonance and the ground-state eigenvalue. The topic of analyticity of eigenvalues and resonances has let to several studies and advances in the past. However, to the best of our knowledge, this is the first time that it is addressed from the perspective of Pizzo multiscale analysis. Once the multiscale analysis is set up our method gives easy access to analyticity: Essentially, it amounts to proving it for isolated eigenvalues only and use that uniform limits of analytic functions are analytic. The type of spectral and resolvent estimates that we prove are needed to control the time evolution including the scattering regime. The latter will be demonstrated in a forthcoming publication. The introduced multiscale method to study spectral and resolvent estimates follows its own inductive scheme and is independent (and different) from the method we apply to construct resonances.     

Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Tuning Emission Wavelength of Polymorphous Crystal via Controllable Alkyl Chain Stacking and Its Vapor- and Thermo-Responsive Fluorescence

Tuning fluorescence colour of solid-state materials has become a topic of increasing interest for both fundamental mechanism study and practical applications such as sensors, optical recording and security printing. In this work, a fluorescent colour tuneable molecule BA-C16 is rationally designed and facilely synthesized by attaching flexible long alkyl chains to 2-hydroxybenzophenone azine ( BA ), which shows both aggregation-induced emission (AIE) and excited-state intramolecular proton transfer (ESIPT) characteristics. Compared to BA , the simple introduction of long alkyl chains in BA-C16 leads to an emission wavelength redshift from 542 to 558 nm. This strategy of extending emission wavelength is rarely reported, and is ascribed to the enlarged through-space π-conjugation between interplanar molecules in the aggregate of BA-C16 . Three crystals of BA-C16 are obtained with green, yellowish green and yellow emission. According to characterization by X-ray crystallography, X-ray powder diffraction and differential scanning calorimetry, alkyl chains play an important role in inducing different stacking modes of the three crystals, which further leads to polymorph-dependent fluorescence colour. BA-C16 exhibits tuneable solid-state fluorescence upon vapor fumigation, or annealing based on a transition between a “near-monomer” crystalline state and a “dimer” crystalline state. BA-C16 is further applied for rewritable fluorescence printing tuned by vapor- and thermal-treatment.     

The maximum multiplicity of the largest k-th eigenvalue in a matrix whose graph is acyclic or unicyclic

Given a graph $G$ we are interested in studying the symmetric matrices associated to $G$ with a fixed number of negative eigenvalues. For this class of matrices we focus on the maximum possible nullity. For trees this parameter has already been studied and plenty of applications are known. In this work we derive a formula for the maximum nullity and completely describe its behavior as a function of the number of negative eigenvalues. In addition, we also carefully describe the matrices associated with trees that attain this maximum nullity. The analysis is then extended to the more general class of unicyclic graphs. Further our work is applied to re-describing all possible partial inertias associated with trees, and is employed to study an instance of the inverse eigenvalue problem for certain trees.     

Attaching tweezers like ionophore to a proton crane: theoretical design of new tautomeric sensors

ABSTRACT

The tautomeric optical sensors based on 4-(phenyldiazenyl)naphthalen-1-ol exist in their pure enol tautomeric form as free ligands, while the addition of metal ion fully shifts the equilibrium towards the keto tautomer allowing a red shift in the measured absorbance. This effect is achieved when a side ionophore group is connected to a tautomeric backbone by a spacer in a way that stabilizes the enol form via hydrogen boding. When the ionophore captures the metal ion the keto form is stabilized due to C─O tautomeric group participation in the complex. In the current study, we model theoretically the effect of symmetric tweezer like ionophores (RCOXCOR, where X, being CH or N, is the linker to the tautomeric backbone) on the tautomeric state and complexation ability of 4-(phenyldiazenyl)naphthalen-1-ol containing ligands. It was found that enol form stabilisation is achieved when R?=?NMe₂, independing on the linker. Both ligands are unsuitable for capturing alkali metal ions. The calculations predict that the complexation with alkali earth metal ions could lead to a full shift of the tautomeric equilibrium towards keto tautomer.     

Formation of intermediate coupling optical polarons and bipolarons in two-dimensional systems

The formation of the optical polaron and bipolaron in two-dimensional (2D) systems is studied in the intermediate electron–phonon coupling regime. The total energies of the 2D polaron and bipolaron are calculated by using the Buimistrov–Pekar method of canonical transformations. The obtained results are compared with other existing results obtained by using the Feynman path integral method and the modified Lee–Low–Pines unitary transformation method. It is shown that the electron–phonon correlation significantly reduces the total energy of the 2D polaron in comparison with the energy of the strong coupling (adiabatic) polaron. It is found that the polaron formation in 2D systems is possible when the electron–phonon coupling constant α is greater than the critical value ${\alpha }_c?2.94$, which is much lower than a critical value of the electron–phonon coupling constant α in three-dimensional (3D) systems. The critical values of the Fröhlich coupling constant α and the ratio $\eta ={\epsilon }_{\infty }/{\epsilon }_0$ (where ${\epsilon }_{\infty }$ and ${\epsilon }_0$ are the high frequency and static dielectric constants, respectively), which determine the bipolaron stability region in 2D systems, are calculated numerically. It is interesting for application to the layered cuprate superconductors that the (bi)polarons are formed more easily in quasi-2D regions than in the bulk. It is argued that the high-$T_c$ cuprate superconductivity can exist above the bulk superconducting transition temperature $T_c$ as the persisting superfluidity of polaronic (bosonic) Cooper pairs and large bipolarons at quasi-2D grain boundaries or in the CuO₂ layers above $T_c$.